midwest dental handpieces kavo dental handpieces star dental handpieces NSK dental handpieces W&H Dental Handpieces nakamura dental handpieces bien air handpieces Sirona Dental Handpieces ares dental handpieces

Dental Handpiece Torque – Size Matters

dental handpiece torqueMost dental handpiece manufacturers provide a selection of head sizes to accommodate the dentists needs for the appropriate speed and dental handpiece torque. Often they are classified as large, standard, and mini. Many manufacturers feel the most limiting measurement is front to rear, which is tip of the chuck to very back of handpiece head. This measurement will typically be around 12 mm, or so, and helps determine the height of handpiece with selected bur installed.

Head Size Typically Determines Handpiece Torque

Torque heads are typically larger. Some would say wider (around 13 mm). Either way, the wider design contains a larger impeller, which delivers more torque. Since the larger impeller produces more power with a given amount of air, speed is reduced, resulting in a little less noise.

 

Standard heads are, in most cases, the best choice for multiple uses, providing adequate dental handpiece torque. The one pictured left is a little longer front to rear. This design allows for a little more chuck surface providing very good hold on bur for the higher speeds which accompany this size. The longer rotor also adds stability, helping to minimize vibration at speeds approaching 450,000 rpm.


Mini heads are typically smaller front to rear, and total diameter. Smaller heads produce less dental handpiece torque and operate at higher speeds. Higher speeds, as a rule, produce more noise. Of course, these may be necessary evils when dealing with pedo applications, smaller mouths, and those patients with limited range of jaw movement.

Bearings Affect Torque

Bearings can also be a limiting factor in dental handpiece torque. Bearings are very specialized and must be chosen with a high degree of accuracy for each application. Some designs are capable of producing very good torque at slower speeds, but will quickly lose effectiveness at higher speeds, as heat and other factors must be taken into consideration. The expansion and contraction resulting from the rigors of the dental environment will quickly affect bearings not designed for such. Myonic, Timken, NHBB, Barden, and NSK are considered among the most highly rated for this application.

Impellers Affect Dental Handpiece Torque

Impellers are made from composite materials which tend to handle the harsh environment of the autoclave without excessive expansion or tendency to become brittle. Impellers which are not properly balanced can greatly effect torque, especially when varying handpiece speeds are required to complete a preparation. All dental turbines have critical speeds (speeds at which turbine operates at a higher vibration level). Well balanced impellers help to reduce this range to a minimum, resulting in more constant torque throughout.

Some impellers are not balanced at all. This combined with less expensive (and effective) bearings is why you may find a wide range of turbine prices on the internet. In many cases these turbines will provide very good service. I guess buyer beware is in order here. If you replace turbines yourself, take a close look at the impeller. Balanced impellers will typically have small indentations on one or more of the impeller blades, often in a different color. Of course, turbines with less expensive bearings, and unbalanced impellers are good choices for some, when absolute maximum dental handpiece torque is not required. However, if you are the type to drive a Mercedes, you may expect it to run like one.

Kavo Super torque Handpieces Available:

CURL error code = 28. (Operation timed out after 20000 milliseconds with 0 bytes received)

Dental Bearings

dental bearingsDental Bearings Rated By ABEC

Not to be confused with OPEC, the guys responsible for making it more expensive to operate those gas guzzlers americans love so much, dental bearings are rated by ABEC. The Annular Bearing Engineering Committee (ABEC) scale is a system for rating the manufacturing tolerances of precision bearings.

Dental Bearings Rated 1 through 9

Bearings rated under this system are rated with a number from 1 to 9. 7 is acceptable. 9 is best. Anything less should not be used in a high quality dental handpiece. The higher the number, the tighter the tolerances, the more expensive the bearing. Dental bearings are some of the most highly scrutinized in the bearing industry due to their high speeds when in use, and expected exposure to the constant heating and cooling of the autoclave cycle between uses.  Tolerances can be described as the distance between rotating and stationary components. Dental bearings obviously require extreme precision where this is concerned.

Angular Contact and Radial Dental Bearingsdental bearings

The two types of bearing most used in the highspeed handpiece application are called angular contact  and radial. These terms refer to the type of inner race, or ring. Angular contact bearings are typically  preferred by handpiece manufacturers, but some applications dictate  using  the radial type.

Stainless Steel Or Ceramic

Dental bearings are, in most cases, stainless steel with some sort of low friction component embedded to make them resistant to failure when exposed to poor lubrication practices. The balls ride in a cage made of various materials resistant to cracking caused by exposure to the extreme conditions of the application. Phenolic and Torlon cages work especially well by absorbing lubricant for added friction resistance. Ceramic dental bearings are also highly recommended as they hold up well against heat and friction. Ceramic sealed bearings packed in a high temperature grease are considered lube free.  Star Dental has used these for years with great success. Manufacturing difficulties make ceramic bearings considerably more expensive. Timken, Barden, Myonic and New Hampshire Bearing produce very high quality bearings in our opinion, and are available to most dental equipment dealers.

Dentsply Midwest, Kavo, NSK, Star Dental, Bien Air, W&H, Lares, Sirona, and Nakamura are registered trademarks not associated with DentalHandpieces.com
SiteLock Webmaster Link Exchange - Free Web Link Exchange Directory. Where Webmasters go to trade links with other webmasters